CO2 Cell Culture INCUBATORS
				Contherm has achieved wide recognition as a manufacturer of high-precision environmental chambers for the laboratory professional. Using proven technology with enhanced user-friendly firmware techniques, the Mitre Series CO2 Cell Culture Incubators create a precise environment for tissue and cell propagation, and are available in Standard, Tropicool and Polar variants. The Standard CO2 Incubator offers a temperature range of ambient+4°C to 50°C, a CO2 range of 0.3 to 19.9%, and humidity levels better than 80%RH. Temperatures below 25°C at an ambient of 30°C can be achieved with the Tropicool Variant CO2 Incubator (4150T), a CO2 range of 0.3 to 19.9%, and humidity levels better than 70%RH. The Mitre Series Polar Variant CO2 Incubator offers a temperature range of 15°C to 50°C, a CO2 range of 0.3 to 19.9%, and humidity levels better than 70%RH. Contherm incubators are equipment-friendly, and comply with AS/NZS 2064 EMC Standards.
				Standard
				Standard CO2 Incubators These Mitre Series Incubators feature an anticipative logic system controlling both temperature and CO2 levels, with a dedicated LED display monitoring these functions. A temperature range of ambient+4°C to 50°C, and humidity levels higher than 80% RH at 37°C can be achieved. The Contherm microprocessor-based control system is e²rom-backed to save set-points during power failures, with all models featuring alarm displays and automatic high/low limit protection, which maintains existing parameters in the event of sensor failure. A fan-driven system circulates air over a stainless steel sheathed tubular heater.    Featuring unique catch and hinge componentry, the fully-sealed toughened NZS1223 glass inner door incorporates an integral heater to prevent condensation, and enhance the humidity and temperature envelopes. Model 4150 Brief Specifications -Mitre Series Incubators   Temperature Range Ambient+4°C to 50°C Temporal Accuracy ±0.2°C (tested empty at 37°C, 20°C Ambient) Spatial Accuracy ±0.4°C (tested empty at 37°C, 20°C Ambient) Humidity   Natural Vaporisation from Pan, more than 80% RH at 37°C CO2 Control Microprocessor -Accuracy at 37°C 5% CO2 ±0.5%. Dedicated LED Display CO2 Range 0.3 - 19.9% Inlet CO2 Supply Pressure 0.3kg/cm² Power Supply Requirements 236 Watts at 230-240Vac 50Hz supply For complete details of dimensions, options available etc., please contact Contherm Scientific or your nearest agent. Specifications - Mitre Series Incubators [pdf]  Home - About Us - Contact Us - Product Guide
	Model 4150 -155Lt. Model 4200 -200Lt. Model 4400 -400Lt.
	Designer Series Incubators Biocell Series Incubators Biocell Shelf-Life Chambers Designer Series Ovens Series 2000 Ovens Classic series Culture and Boiling Baths Series 5000 Environmental Chambers Biosyn Orbital Incubators Series 6000 Tissue and > Plant Growth Chambers Software
				Tropicool
				CO2 Cell Culture Incubators- "Tropicool" Variants To deal cost-effectively with bacteriological culturing in the tropics, Contherm has developed the Tropicool system. The heart of this system and serving as the active cooling element, is a semi-conductor device which contains no moving parts or plumbing, yet is very effective at transferring heat energy. This entirely new thermoelectric technology gives the Contherm Mitre Series "Tropicool" Variant incubators a new dimension in quality and performance. With low power consumption, operating temperatures below 25°C at an ambient of 30°C , for instance, can be achieved (4150T). The Mitre Series "Tropicool" Variant Incubators enable quality incubating in the tropics, and B.O.D. work in temperate regions. Plate and sample drying problems are greatly reduced with the "Tropicool" system, with high humidity levels being maintained due to the elevated dew point. Using proven technology, a precise environment is created for tissue and cell propagation. These models feature an anticipative logic system controlling both temperature and CO2 levels.    A dedicated LED display monitors both these functions. Humidity levels higher than 70% RH at 37°C can be achieved. The Contherm microprocessor-based control system is EEROM backed to save set-points and calibration factors during power failures, with all models featuring alarm displays and automatic high/low limit protection. Featuring unique catch and hinge componentry, the fully-sealed toughened NZS1223 glass inner door incorporates an integral heater to prevent condensation, and enhance the humidity and temperature envelopes. Model 4150T Brief Specifications -Mitre Series "Tropicool" Variant Incubators   Temperature Range Ambient-5°C to 50°C Temporal Accuracy ±0.3°C (tested empty at 37°C, 20°C Ambient) Spatial Accuracy ±0.4°C (tested empty at 37°C, 20°C Ambient) Humidity   Natural Vaporisation from Pan, more than 70% RH at 37°C CO2 Control Microprocessor -Accuracy at 37°C 5% CO2 ±0.5%. Dedicated LED Display CO2 Range 0.3 - 19.9% Inlet CO2 Supply Pressure 0.3kg/cm² Power Requirements and Consumption 600 Watts at 230-240Vac 50Hz supply For complete details of dimensions, options available etc., please contact Contherm Scientific or your nearest agent. Specifications - Mitre Series Tropicool Variant Incubators [pdf]  Home - About Us - Contact Us - Product Guide
	Model 4150T -150Lt. Model 4200T -200Lt. Model 4400T -400Lt.
	Designer Series Incubators Biocell Series Incubators Biocell Shelf-Life Chambers Designer Series Ovens Series 2000 Ovens Classic series Culture and Boiling Baths Series 5000 Environmental Chambers Biosyn Orbital Incubators Series 6000 Tissue and Plant Growth Chambers Software
				Polar
				CO2 Cell Culture Incubators- "Polar" Variants With accurate and reliable control from 15°C to 50°C at higher ambient temperatures, and a true one-pass air circulation system, The Mitre Series "Polar" Variant Incubators enable quality incubating in the tropics, and B.O.D. work in temperate regions. Plate and sample drying problems are greatly reduced, with high humidity levels being maintained due to the elevated dew point. Using proven technology, a precise environment is created for tissue and cell propagation. These models feature an anticipative logic system controlling both temperature and CO2 levels. A dedicated LED display monitors both these functions. Humidity levels higher than 70% RH at 20°C can be achieved using a more effective vaporisation technique. The Contherm microprocessor-based control system is EEROM backed to save set-points and calibration factors during power failures, with    all models featuring alarm displays and automatic high/low limit protection. Featuring unique catch and hinge componentry, the fully-sealed toughened NZS1223 glass inner door incorporates an integral heater to prevent condensation, and enhance the humidity and temperature envelopes. Model 4150C Brief Specifications -Mitre Series "Polar" Variant Incubators   Temperature Range 15°C to 50°C Temporal Accuracy ±0.4°C (tested empty at 20°C, 20°C Ambient) Spatial Accuracy ±1.5°C (tested empty at 20°C, 20°C Ambient) Humidity   Natural Vaporisation from Pan, more than 70% RH at 20°C CO2 Control Microprocessor -Accuracy at 37°C 5% CO2 ±0.5%. Dedicated LED Display CO2 Range 0.3 - 19.9% Inlet CO2 Supply Pressure 0.3kg/cm² Power Requirements and Consumption 750 Watts at 230-240Vac 50Hz supply For complete details of dimensions, options available etc., please contact Contherm Scientific or your nearest agent. Specifications - Mitre Series Polar Variant Incubators [pdf]  Home - About Us - Contact Us - Product Guide
	Model 4150C -150Lt. Model 4200C -200Lt. Model 4400C -400Lt.
	Designer Series Incubators Biocell Series Incubators Biocell Shelf-Life Chambers Designer Series Ovens Series 2000 Ovens Classic series Culture and Boiling Baths Series 5000 Environmental Chambers Biosyn Orbital Incubators Series 6000 Tissue and Plant Growth Chambers Software